Introduction¶
The datasheet for the DS3231 explains that this part is an “Extremely Accurate I²C-Integrated RTC/TCXO/Crystal”. And, hey, it does exactly what it says on the tin! This Real Time Clock (RTC) is the most precise you can get in a small, low power package.
Most RTCs use an external 32kHz timing crystal that is used to keep time with low current draw. And that’s all well and good, but those crystals have slight drift, particularly when the temperature changes (the temperature changes the oscillation frequency very very very slightly but it does add up!) This RTC is in a beefy package because the crystal is inside the chip! And right next to the integrated crystal is a temperature sensor. That sensor compensates for the frequency changes by adding or removing clock ticks so that the timekeeping stays on schedule.
This is the finest RTC you can get, and now we have it in a compact, breadboard-friendly breakout. With a coin cell plugged into the back, you can get years of precision timekeeping, even when main power is lost. Great for datalogging and clocks, or anything where you need to really know the time.
Dependencies¶
This driver depends on the Register and Bus Device libraries. Please ensure they are also available on the CircuitPython filesystem. This is easily achieved by downloading a library and driver bundle.
Usage Notes¶
Basics¶
Of course, you must import the library to use it:
import busio
import adafruit_ds3231
import time
All the Adafruit RTC libraries take an instantiated and active I2C object
(from the busio
library) as an argument to their constructor. The way to
create an I2C object depends on the board you are using. For boards with labeled
SCL and SDA pins, you can:
from board import *
You can also use pins defined by the onboard microcontroller
through the
microcontroller.pin
module.
Now, to initialize the I2C bus:
myI2C = busio.I2C(SCL, SDA)
Once you have created the I2C interface object, you can use it to instantiate the RTC object:
rtc = adafruit_ds3231.DS3231(myI2C)
Date and time¶
To set the time, you need to set datetime
to a time.struct_time
object:
rtc.datetime = time.struct_time((2017,1,9,15,6,0,0,9,-1))
After the RTC is set, you retrieve the time by reading the datetime
attribute and access the standard attributes of a struct_time such as tm_year
,
tm_hour
and tm_min
.
t = rtc.datetime
print(t)
print(t.tm_hour, t.tm_min)
Alarm¶
To set the time, you need to set alarm1
or alarm2
to a tuple with a
time.struct_time
object and string representing the frequency such as “hourly”:
rtc.alarm1 = (time.struct_time((2017,1,9,15,6,0,0,9,-1)), "daily")
After the RTC is set, you retrieve the alarm status by reading the corresponding
alarm1_status
or alarm2_status
attributes. Once True, set it back to False
to reset.
if rtc.alarm1_status:
print("wake up!")
rtc.alarm1_status = False