import board import digitalio import gamepad import time B_UP = 1 << 0 B_DOWN = 1 << 1 pad = gamepad.GamePad( digitalio.DigitalInOut(board.D10), digitalio.DigitalInOut(board.D11), ) y = 0 while True: buttons = pad.get_pressed() if buttons & B_UP: y -= 1 print(y) elif buttons & B_DOWN: y += 1 print(y) time.sleep(0.1) while buttons: # Wait for all buttons to be released. buttons = pad.get_pressed() time.sleep(0.1)
GamePad([b1[, b2[, b3[, b4[, b5[, b6[, b7[, b8]]]]]]]])¶
Initializes button scanning routines.
DigitalInOutobjects, which immediately get switched to input with a pull-up, and then scanned regularly for button presses. The order is the same as the order of bits returned by the
get_pressedfunction. You can re-initialize it with different keys, then the new object will replace the previous one.
The basic feature required here is the ability to poll the keys at regular intervals (so that de-bouncing is consistent) and fast enough (so that we don't miss short button presses) while at the same time letting the user code run normally, call blocking functions and wait on delays.
They button presses are accumulated, until the
get_pressedmethod is called, at which point the button state is cleared, and the new button presses start to be recorded.
Get the status of buttons pressed since the last call and clear it.
Returns an 8-bit number, with bits that correspond to buttons, which have been pressed (or held down) since the last call to this function set to 1, and the remaining bits set to 0. Then it clears the button state, so that new button presses (or buttons that are held down) can be recorded for the next call.
Disable button scanning.