PulseOut – Output a pulse train

PulseOut is used to pulse PWM “carrier” output on and off. This is commonly used in infrared remotes. The pulsed signal consists of timed on and off periods. Unlike PWM, there is no set duration for on and off pairs.

class pulseio.PulseOut(carrier)

Create a PulseOut object associated with the given PWM out experience.

Parameters:carrier (PWMOut) – PWMOut that is set to output on the desired pin.

Send a short series of pulses:

import array
import pulseio
import board

pwm = pulseio.PWMOut(board.D13, duty_cycle=2 ** 15)
pulse = pulseio.PulseOut(pwm)
#                             on   off     on     off   on
pulses = array.array('H', [65000, 1000, 65000, 65000, 1000])

# Modify the array of pulses.
pulses[0] = 200

Deinitialises the PulseOut and releases any hardware resources for reuse.


No-op used by Context Managers.


Automatically deinitializes the hardware when exiting a context. See Lifetime and ContextManagers for more info.


Pulse alternating on and off durations in microseconds starting with on. pulses must be an array.array with data type ‘H’ for unsigned halfword (two bytes).

This method waits until the whole array of pulses has been sent and ensures the signal is off afterwards.

Parameters:pulses (array.array) – pulse durations in microseconds