# SPDX-FileCopyrightText: 2016 Damien P. George
# SPDX-FileCopyrightText: 2017 Ladyada for Adafruit Industries
# SPDX-FileCopyrightText: 2017 Scott Shawcroft for Adafruit Industries
# SPDX-FileCopyrightText: 2019 Roy Hooper
#
# SPDX-License-Identifier: MIT
"""
`adafruit_dotstar` - DotStar strip driver (for CircuitPython 5.0+ with _pixelbuf)
=================================================================================
* Author(s): Damien P. George, Limor Fried, Scott Shawcroft & Rose Hooper
"""
# pylint: disable=ungrouped-imports
import busio
import digitalio
import adafruit_pixelbuf
try:
from typing import Optional, Type
from types import TracebackType
from circuitpython_typing import ReadableBuffer
from microcontroller import Pin
except ImportError:
pass
__version__ = "0.0.0+auto.0"
__repo__ = "https://github.com/adafruit/Adafruit_CircuitPython_DotStar.git"
START_HEADER_SIZE = 4
# Pixel color order constants
RBG = "PRBG"
"""Red Blue Green"""
RGB = "PRGB"
"""Red Green Blue"""
GRB = "PGRB"
"""Green Red Blue"""
GBR = "PGBR"
"""Green Blue Red"""
BRG = "PBRG"
"""Blue Red Green"""
BGR = "PBGR"
"""Blue Green Red"""
[docs]
class DotStar(adafruit_pixelbuf.PixelBuf):
"""
A sequence of dotstars.
:param ~microcontroller.Pin clock: The pin to output dotstar clock on.
:param ~microcontroller.Pin data: The pin to output dotstar data on.
:param int n: The number of dotstars in the chain
:param float brightness: Brightness of the pixels between 0.0 and 1.0
:param bool auto_write: True if the dotstars should immediately change when
set. If False, `show` must be called explicitly.
:param str pixel_order: Set the pixel order on the strip - different
strips implement this differently. If you send red, and it looks blue
or green on the strip, modify this! It should be one of the values above.
:param int baudrate: Desired clock rate if using hardware SPI (ignored if
using 'soft' SPI). This is only a recommendation; the actual clock
rate may be slightly different depending on what the system hardware
can provide.
Example for Gemma M0:
.. code-block:: python
import adafruit_dotstar
import time
from board import *
RED = 0x100000
with adafruit_dotstar.DotStar(APA102_SCK, APA102_MOSI, 1) as pixels:
pixels[0] = RED
time.sleep(2)
.. py:method:: DotStar.show()
Shows the new colors on the dotstars themselves if they haven't already
been autowritten.
The colors may or may not be showing after this function returns because
it may be done asynchronously.
.. py:method:: DotStar.fill(color)
Colors all dotstars the given ***color***.
.. py:attribute:: brightness
Overall brightness of all dotstars (0 to 1.0)
"""
def __init__(
self,
clock: Pin,
data: Pin,
n: int,
*,
brightness: float = 1.0,
auto_write: bool = True,
pixel_order: str = BGR,
baudrate: int = 4000000
) -> None:
self._spi = None
try:
self._spi = busio.SPI(clock, MOSI=data)
while not self._spi.try_lock():
pass
self._spi.configure(baudrate=baudrate)
except (NotImplementedError, ValueError):
self.dpin = digitalio.DigitalInOut(data)
self.cpin = digitalio.DigitalInOut(clock)
self.dpin.direction = digitalio.Direction.OUTPUT
self.cpin.direction = digitalio.Direction.OUTPUT
self.cpin.value = False
# Supply one extra clock cycle for each two pixels in the strip.
trailer_size = n // 16
if n % 16 != 0:
trailer_size += 1
# Four empty bytes for the header.
header = bytearray(START_HEADER_SIZE)
# Zero bits, not ones, for the trailer, to avoid lighting up
# downstream pixels, if there are more physical pixels than
# the length of this object.
trailer = bytearray(trailer_size)
super().__init__(
n,
byteorder=pixel_order,
brightness=brightness,
auto_write=auto_write,
header=header,
trailer=trailer,
)
[docs]
def deinit(self) -> None:
"""Blank out the DotStars and release the resources."""
self.fill(0)
self.show()
if self._spi:
self._spi.deinit()
else:
self.dpin.deinit()
self.cpin.deinit()
def __enter__(self) -> "DotStar":
return self
def __exit__(
self,
exception_type: Optional[Type[type]],
exception_value: Optional[BaseException],
traceback: Optional[TracebackType],
) -> None:
self.deinit()
def __repr__(self) -> str:
return "[" + ", ".join([str(x) for x in self]) + "]"
@property
def n(self) -> int:
"""
The number of dotstars in the chain (read-only)
"""
return len(self)
def _transmit(self, buffer: ReadableBuffer) -> None:
if self._spi:
self._spi.write(buffer)
else:
self._ds_writebytes(buffer)
def _ds_writebytes(self, buffer: ReadableBuffer) -> None:
for b in buffer:
for _ in range(8):
self.dpin.value = b & 0x80
self.cpin.value = True
self.cpin.value = False
b = b << 1
self.cpin.value = False