Simple tests

Ensure your device works with these simple tests.

examples/lsm303_simpletest.py
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
""" Display both accelerometer and magnetometer data once per second """

import time
import board
import busio
import adafruit_lsm303

i2c = busio.I2C(board.SCL, board.SDA)
sensor = adafruit_lsm303.LSM303(i2c)

while True:
    acc_x, acc_y, acc_z = sensor.acceleration
    mag_x, mag_y, mag_z = sensor.magnetic

    print('Acceleration (m/s^2): ({0:10.3f}, {1:10.3f}, {2:10.3f})'.format(acc_x, acc_y, acc_z))
    print('Magnetometer (gauss): ({0:10.3f}, {1:10.3f}, {2:10.3f})'.format(mag_x, mag_y, mag_z))
    print('')
    time.sleep(1.0)
examples/fast_accel/fast_accel.py
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
""" Read data from the accelerometer and print it out, ASAP! """

import board
import busio

import adafruit_lsm303

i2c = busio.I2C(board.SCL, board.SDA)
sensor = adafruit_lsm303.LSM303(i2c)

while True:
    accel_x, accel_y, accel_z = sensor.acceleration
    print('{0:10.3f} {1:10.3f} {2:10.3f}'.format(accel_x, accel_y, accel_z))
examples/fast_mag/fast_mag.py
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
""" Read data from the magnetometer and print it out, ASAP! """

import board
import busio
import adafruit_lsm303

i2c = busio.I2C(board.SCL, board.SDA)
sensor = adafruit_lsm303.LSM303(i2c)

while True:
    mag_x, mag_y, mag_z = sensor.magnetic
    print('{0:10.3f} {1:10.3f} {2:10.3f}'.format(mag_x, mag_y, mag_z))
examples/raw_and_cooked/raw_and_cooked.py
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
""" Display both accelerometer and magnetometer data once per second """

import time
import board
import busio

import adafruit_lsm303

i2c = busio.I2C(board.SCL, board.SDA)
sensor = adafruit_lsm303.LSM303(i2c)

while True:
    raw_accel_x, raw_accel_y, raw_accel_z = sensor.raw_acceleration
    accel_x, accel_y, accel_z = sensor.acceleration
    raw_mag_x, raw_mag_y, raw_mag_z = sensor.raw_magnetic
    mag_x, mag_y, mag_z = sensor.magnetic

    print('Acceleration raw: ({0:6d}, {1:6d}, {2:6d}), (m/s^2): ({3:10.3f}, {4:10.3f}, {5:10.3f})'
          .format(raw_accel_x, raw_accel_y, raw_accel_z, accel_x, accel_y, accel_z))
    print('Magnetometer raw: ({0:6d}, {1:6d}, {2:6d}), (gauss): ({3:10.3f}, {4:10.3f}, {5:10.3f})'
          .format(raw_mag_x, raw_mag_y, raw_mag_z, mag_x, mag_y, mag_z))
    print('')
    time.sleep(1.0)