Helper library for the SCD30 CO2 sensor
This driver depends on:
Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.
Installing from PyPI¶
On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:
pip3 install adafruit-circuitpython-scd30
To install system-wide (this may be required in some cases):
sudo pip3 install adafruit-circuitpython-scd30
To install in a virtual environment in your current project:
mkdir project-name && cd project-name python3 -m venv .env source .env/bin/activate pip3 install adafruit-circuitpython-scd30
import time import board import adafruit_scd30 i2c = board.I2C() # uses board.SCL and board.SDA scd = adafruit_scd30.SCD30(i2c) while True: # since the measurement interval is long (2+ seconds) we check for new data before reading # the values, to ensure current readings. if scd.data_available: print("Data Available!") print("CO2:", scd.CO2, "PPM") print("Temperature:", scd.temperature, "degrees C") print("Humidity:", scd.relative_humidity, "%%rH") print("") print("Waiting for new data...") print("") time.sleep(0.5)
API documentation for this library can be found on Read the Docs.
Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.
For information on building library documentation, please check out this guide.