A CircuitPython driver for the Sensirion SGP30 gas sensor with eCO2 and TVOC output. This sensor uses I2C!
Installation and Dependencies¶
This driver depends on:
Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.
Installing from PyPI¶
On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:
pip3 install adafruit-circuitpython-sgp30
To install system-wide (this may be required in some cases):
sudo pip3 install adafruit-circuitpython-sgp30
To install in a virtual environment in your current project:
mkdir project-name && cd project-name python3 -m venv .env source .env/bin/activate pip3 install adafruit-circuitpython-sgp30
See the guide for wiring and installation instructions.
First, import the library:
import busio import adafruit_sgp30
Next, initialize the I2C bus object:
import board i2c_bus = busio.I2C(board.SCL, board.SCL, frequency=100000)
Since we have the I2C bus object, we can now use it to instantiate the SGP30 object:
sgp30 = adafruit_sgp30.Adafruit_SGP30(i2c_bus)
Reading from the Sensor¶
To read from the sensor:
eCO2, TVOC = sgp30.iaq_measure() print("eCO2 = %d ppm \t TVOC = %d ppb" % (eCO2, TVOC))
Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.
To build this library locally you’ll need to install the circuitpython-build-tools package.
python3 -m venv .env source .env/bin/activate pip install circuitpython-build-tools
Once installed, make sure you are in the virtual environment:
Then run the build:
circuitpython-build-bundles --filename_prefix adafruit-circuitpython-sgp30 --library_location .
Sphinx is used to build the documentation based on rST files and comments in the code. First, install dependencies (feel free to reuse the virtual environment from above):
python3 -m venv .env source .env/bin/activate pip install Sphinx sphinx-rtd-theme
Now, once you have the virtual environment activated:
cd docs sphinx-build -E -W -b html . _build/html
This will output the documentation to
docs/_build/html. Open the index.html in your browser to
view them. It will also (due to -W) error out on any warning like Travis will. This is a good way to
locally verify it will pass.